|
Squeegee
Essentials |
 |
GT1049 Gator Blade I
Features two opposing arched blades. The narrower blade allows
for more scraping pressure for around rear defrosters and for adhesive
removal on surfaces where metallic razor blades scratch surfaces. |
 |
GT1050 Gator Blade II
Features three functional edges. The first 3.5" linear edge is
great for lifting bottom rollup gaskets while tucking the film safely
beneath to reduce peeling. A long slender acute point works for
reaching into tight corners of quarter windows and behind front and rear
gaskets of roll-downs. The opposing 18" radius edge is also 3.5" wide
and also functions well for lifting and tucking. The 1.95" third edge
features a 4" radius blade that fits tighter curvature situations and is a
good pressure concentration blade.
|
 |
GT040
Slim
Foot
Modeled after the Big Foot Squeegee, the slim foot has a
slender design than can reach into tighter openings. This no rib
squeegee helps reach behind brake lights and has a vinyl grip for secure
handling. |
 |
GT043
Big Foot
Designed to reach curved back glass windows. This 6" squeegee
with a 12" handle allows the installer to apply the necessary pressure
in those tight rear window areas. This is a must for every
installer's tool box
|
|

|
GT044BLUE
Blue Little Foot
This
squeegee measures about 6" (15 cm) along the usable edge. The
pointed edge of this tool allows the installer to squeegee in very tight
areas. The Little Foot has plenty of room to keep a good grip on
the squeegee. |
 |
GT044 Red Little Foot
This squeegee measures about 6" (15 cm) along
the usable edge. The pointed edge of this tool allows the
installer to squeegee in very tight areas. The Little Foot has
plenty of room to keep a good grip on the squeegee.
|
|
GT044BLACK Black Little Foot
This squeegee measures about 6" (15 cm) along
the usable edge. The pointed edge of this tool allows the
installer to squeegee in very tight areas. The Little Foot has
plenty of room to keep a good grip on the squeegee. |
 |
GT033
Red Devil Squeegee
Flexible squeegee that is great for tight corners and maneuvering around
gaskets. |
 |
GT091
Slammer
Used for cleaning
corners and along gaskets, wicking water out along borders and easily
reaches rear windows and sharp angled corners. |
 |
GT092
Shuttle
A hard card with
the ability to reach into tight areas located at the bottom edge of rear
window glass. |
 |
GT148
6" Block Squeegee |
 |
GT149
12" Block Squeegee |
 |
GT202
The Conquerer |
 |
GT202B
Blue Conquerer
Same as
the original Conquerer (GT202) with a slightly harder durometer for more
squeegeeing power. |
 |
GT254
Blue Power Stroke
The
Blue Power Stroke has a durometer for the ultimate in moisture removal,
especially for sputtered films. |
 |
GT255
Red Power Stroke
Great
for the final pass on metal films. |
 |
GT256
Yellow Power Stroke
Works
well with dyed films and the first pass on metal films. |
 |
GT1000
MACTAC Felt Squeegee
Recommended for paint protection installations |
 |
GT1010
3M Wet or Dry Squeegee
Recommended for paint protection installations |
 |
GT995
White Knight Squeegee
Large squeegee with narrow handle allowing for better reach |
 |
GT032Y
Tail Fin Yellow (Firm)
Great for getting behind brake lights and back window applications. |
 |
GT032G
Tail Fin Green (Soft)
Great for getting behind brake lights and back window applications. |
 |
GT067
Clear Super Squeegee, Small 3" |
 |
GT066
Clear Super Squeegee, Large 6" |
 |
GT038
Clear Super Squeegee, Extra Large
12"
Use the 12 Inch Squeegee for large areas of smoothing.
Aluminum reinforcement ensures rigidity and decreases wear and tear by
resisting the flex factor that causes gradual deterioration. |
 |
GT1025Y- Quick Fix-Yellow
GT1025W- Quick Fix-White
GT1025PLT-Quick Fix-Platinum
Card squeegee with good angles that extend your area for better
manipulation. Great for getting behind gaskets and rubber seals.
|
 |
GT034
Whale Tail Squeegee
Great for
getting behind brake lights and back window applications. |
 |
GT035
Whale Tail Replacement Blade |
 |
GT036
Whale Tail Replacement Handle |
 |
GT068
Hard Card Sharpener
Ideal
way to maintain a sharp edge on hard cards and other squeegees. With one
or two strokes your squeegee edge is restored to the same condition as
when it was first used. |
 |
GT113GREEN- Green Diamond Tip
GT113RED- Red Diamond Tip
GT113WHITE- White Diamond Tip
GT113YELLOW- Yellow Diamond Tip
These 5" cards have angled corners that allow installers to reach
into tight corners making it a great tool for automotive and flat glass
applications.
|
 |
GT201G
Green Contour (Soft) |
 |
GT201Y
Yellow Contour (Firm) |
 |
GT201PLT
Platinum Contour (Hard) |
 |
GT200GLD- EZ Reach Gold (Firm)
GT200PLT- EZ Reach Platinum (Hard)
Makes getting into corners EZ |
 |
GT151Y- Yellow Quick Foot (Soft)
GT151B- Blue Quick Foot (Hard)
GT151W- White Quick Foot (Firm)
Great automotive tools for those hard to reach places.
|
 |
GT257
5" Orange Crush
The Orange Crush squeegee helps expel water from under the film while
keeping its strength. Can be used with GT057, 5" Crusher Handle or
alone. (See Handled Squeegee Section)
|
 |
GT258
5" Cropped Orange Crush
The Orange Crush squeegee helps expel water from under the film while
keeping its strength. The Cropped Orange Crush conforms to curved glass.
Can be used with GT057, 5" Crusher Handle or alone. (See Handled
Squeegees Section)
|
 |
GT259
8" Orange Crush
The
Orange Crush squeegee helps expel water from under the film while
keeping its strength. Can be used with GT058, 8" Crusher Handle or
alone. (See Handled Squeegees Section) |
 |
GT1042
Titan Squeegee
The overall length of 14 3/4 inches allows for great access to those hard
to reach rear windows. The Titan's rigid structure allows more removal
of mounting solution and the finger placement at the top of the Titan allows
for better control and comfort. The handle is designed to easily lift
inner and upper door seals.
Follow this link to see a You Tube video
of the Titan in use
YouTube - THE TITAN TOOL.wmv
|